Digital Clamp Meter Accta AT-1000A

Clamp meter used to measure AC/DC voltage and current, resistance, capacitance, frequency, duty cycle, and to perform diode and continuity testing. Jaw opening: 55 mm.

SKU: 891580

To buy this product visit our online store toolboom.com.

Accta AT-1000A is a digital clamp meter used to measure AC/DC voltage, AC/DC current, resistance, capacitance, frequency, duty cycle, and to perform diode and continuity testing. Max. jaw opening is 55 mm. The clamp meter is equipped with a large 3999 digit LCD.

Features

Measurement functions:
- AC/DC voltage;
- AC/DC current;
- resistance;
- capacitance;
- frequency;
- diode testing;
- continuity testing;
- duty cycle.
Data hold function ("HOLD" button).
Button "SELECT" intended for desired function selection.
Relative measurements mode ("REL" button).
Measurement modes/ranges switching ("RANGE/DUTY%" button).
Automatic power off after 15 minutes of inactivity.
Powered from one 9-volt battery.
3999 digit LCD.
Max. jaw opening: 55 mm.
Over limit indication ("OL").
Low battery indication.

Technical Specifications

Function	Range	Accuracy
DC Voltage	400 mV / 4 V / 40 V / 400 V	±(0,5% + 4)
DC Voltage	1000 V	±(1,0% + 6)
AC Voltage	400 mV	±(1,6% + 8)
	4 V / 40 V / 400 V	±(0,8% + 10)
	750 V	±(1,0% + 10)
Resistance	400 Ω	±(0,8% + 5)
	4 kΩ / 40 kΩ / 400 kΩ / 4 MΩ	±(0,8% + 4)
	40 MΩ	±(1,2% + 10)
DC Current	40 A	±(3,0% + 8)
	400 A	±(2,5% + 8)
	1000 A	±(3,0% + 10)
AC Current	40 A	±(3,0% + 10)
	400 A	±(2,5% + 8)
	1000 A	±(3,0% + 10)
Frequency	9.999 Hz / 99.99 Hz / 999.9 Hz / 9.999 Hz / 99.99 Hz	±(0,5% + 4)
Capacitance	4 nF / 40 nF / 400 nF / 4 µF / 40 µF / 100 µF	±(5,0% + 8)
Duty Cycle	0,1%~99,9%
General Specifications
Display	3999 digit LCD
Jaw opening	55 mm
Sampling rate	3 times/s
Working temperature	0..40°C at a humidity no more than 80%
Power	9-volt battery
Dimensions	255 × 90 × 46 mm
Weight	388 g (with a battery)